MENU
CLOSE
HOMEHOME
工業会情報
  • 工業会情報トップ
  • 当会の組織概要
  • 会長挨拶
  • 定款
  • 競争法コンプライアンス規程
  • 企業行動憲章
  • 役員名簿
  • 2016年度事業報告書等
  • 2017年度事業報告書等
会員企業紹介
  • 会員企業紹介トップ
  • 正会員企業紹介
  • 賛助会員企業紹介
  • 会員企業商標一覧
  • 会員の技術・製品情報
  • ISO認証取得会員
バルブメーカー検索 統計 会員向け

サイトマップ|English

一般社団法人 日本バルブ工業会 JAPAN VALVE MANUFACTURERS'ASSOCIATION

サイトマップ|English

  • HOME
  • 工業会情報
  • 会員企業紹介
  • バルブメーカー検索
  • 統計
  • 会員向け
home>バルブの規格>IEC規格

IEC規格

IEC規格

工業プロセス用調節弁の国際規格はIEC/TC65/SC65B/WG9で原案作成が行われています。
同WGには当会からも委員を派遣しております。

規格番号標題および対応JIS規格番号
IEC 60534-1:2005 Industrial-process control valves - Part 1: Control valve terminology and general considerations
・・・JIS B 2005-1
IEC 60534-2-1:2011 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
・・・JIS B 2005-2-1
IEC 60534-2-3:2015 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
・・・JIS B 2005-2-3
IEC 60534-2-4:2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
・・・JIS B 2005-2-4
IEC 60534-2-5:2003 廃版:Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
IEC 60534-3-1:2019 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
・・・JIS B 2005-3-1
IEC 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
・・・JIS B 2005-3-2
IEC 60534-3-3:1998 Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
・・・JIS B 2005-3-3
IEC 60534-4:2006 Industrial-process control valves - Part 4: Inspection and routine testing
・・・JIS B 2005-4
IEC 60534-5:2004 Industrial-process control valves - Part 5: Marking
・・・JIS B 2005-5
IEC 60534-6-1:1997 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators
・・・JIS B 2005-6-1
IEC 60534-6-2:2000 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators
・・・JIS B 2005-6-2
IEC 60534-7:2010 Industrial-process control valves. Part 7: Control valve data sheet
・・・JIS B 2005-7
IEC 60534-8-1:2005 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
・・・JIS B 2005-8-1
IEC 60534-8-2:2011 Industrial-process control valves - Part 8: Noise considerations - Section 2: Laboratory measurement of noise generated by hydrodynamic flow through control valves
・・・JIS B 2005-8-2
IEC 60534-8-3:2010 Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
・・・JIS B 2005-8-3
IEC 60534-8-4:2015 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
・・・JIS B 2005-8-4
IEC 60534-9:2007 Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
  • *IEC規格は日本規格協会のウェブサイトから購入できます。
  • *各規格の改訂・廃止等、最新状況については、IEC、日本工業標準調査会(JISC)、日本規格協会のウェブサイトでご確認くださいますよう、お願いいたします。

バルブの規格

  • JIS規格
  • ISO規格
  • IEC規格
  • JV規格
ページトップ

個人情報保護方針|特定個人情報の適正な取扱いに関する基本方針

一般社団法人日本バルブ工業会

〒105-0011 東京都港区芝公園3-5-8 機械振興会館510 アクセス地図  TEL: 03-3434-1811

Copyright © Japan Valve Manufacturers' Association. All rights reserved